SlideMoor Products

Slidemoor System

Slidemoor Modular & Floating Dock Brackets

Slidemoor Modular & Floating Dock Brackets

image22

 The 18” SlideMoor PLUS is our most frequently used system for mid-sized boats. The 18” PLUS system is typically used on boats up to 35 feet. The Slidemoor System comes in many sizes for all sizes of boats up to 100+ feet. If you're unsure if your boat will work with the Slidemoor System give us a call and we'll be happy to take a look!

Slidemoor Modular & Floating Dock Brackets

Slidemoor Modular & Floating Dock Brackets

Slidemoor Modular & Floating Dock Brackets

image23

 The SlideMoor Floating Dock Bracket "FDB" is the evolution for securing floating docks. The SlideMoor FDB is a better alternative to hoops, rollers, or any other mechanical attachment. Using the SlideMoor Patented Technology, the FDB is easily fixed to pilings or seawalls, and provides a secure, long-lasting fastening system for your floating dock. 

The SlideMoor FDB can be mounted either to the top or side of the floating dock.

Ratchetite Line Tensioner

Slidemoor Modular & Floating Dock Brackets

Ratchetite Line Tensioner

image24

 The RacheTite is a stainless steel, self-contained ratcheting winch that replaces one of your two SlideMoor Slide cleats and simply and easily increases tension to your dock lines while tied to the SlideMoor unit. The RacheTite features a spring-loaded locking detent that solidly clicks with each adjustment ensuring that your vessel remains tight to the SlideMoor bumper.


The RacheTite is easily retrofittable to any SlideMoor System and is designed to take up any slack in the line by simply turning a small lever on the side of the Slide. Simply remove one of the two SlideMoor Slide cleats and replace it with a RacheTite bolting it using the existing cleat mounting holes. Each RatcheTite comes pre-strung with a 5/8” double braided marine grade Low Stretch dock line. Simply run the dock line around your vessel’s cleat and tie it off tightly to the other side of the SlideMoor Slide. Now you’re ready to adjust any slack in the line while tied to the SlideMoor Slide.

Piling Extender

Piling Extender

Ratchetite Line Tensioner

image25

 The SlideMoor Piling Extender is typically used to add height to existing pilings. It affords users the ability to install longer tracks for the SlideMoor system.  

Piling Proxy

Piling Extender

Piling Proxy

image26

The SlideMoor Piling Proxy is a robust, freestanding support bracket designed to replace the need for one of your pilings to align with the cleats on your boat. It is a dock mounted marine grade fixture capable of accommodating moderate lateral loading of a conventional vessel (40 feet LOA or less in calm waters) and can be easily mounted on a conventional fixed dock without the need for major modifications or permits.  

Slide Assist

Piling Extender

Piling Proxy

image27

 

The SlideMoor SlideAssist is the latest addition to SlideMoor's ever evolving product line. It is designed to help lift the Slide when not tied to the boat. 


It is simple, all inclusive and easy to install on both new and existing SlideMoor Systems. It makes supporting an un-tethered Slide much easier at the dock without the challenge of manually holding the Slide up while tying. 


The SlideMoor SlideAssist is the easiest and most cost effective way to adjust the height of your Slides when tying up or leaving the dock.

SlideMoor vs. Hurricanes

Check out how the SlideMoor system held up against Hurricanes

The RatcheTite System

Check out SlideMoor RatcheTite System

SlideMoor Piling Proxy Bracket

Check out the Piling Proxy Bracket

SlideMoor Plus

Check out the SlideMoor Plus

Modular Dock Bracket

Check out the SlideMoor Modular Dock Bracket